 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Zener Diodes MAYK062D Silicon planar type Unit: mm For waveform clipper For surge absorption circuits 3 2.90+0.20 -0.05 1.90.1 (0.95) (0.95) 4 5 1.50+0.25 -0.05 2.8+0.2 -0.3 0.16+0.10 -0.06 * Low joint capacity zener diode 2 0.30+0.10 -0.05 10 1 (0.65) Absolute Maximum Ratings Ta = 25C Parameter Repetitive peak forward current Total power dissipation Junction temperature Storage temperature * 1.1+0.2 -0.1 Symbol IFRM Ptot Tj Tstg Rating 200 200 150 -55 to +150 Unit mA mW C C 1: Cathode 1 2: Cathode 2 3: Cathode 3 0 to 0.1 Note) *: Ptot = 200 mW achieved with a printed circuit board Marking Symbol: 6.2C Internal Connection 3 4 5 2 Electrical Characteristics Ta = 25C 3C Parameter Forward voltage Zener voltage *2 Reverse current Zener rise operating resistance Zener operating resistance Terminal capacitance Symbol VF VZ IR RZK RZ Ct *1 Conditions IF = 10 mA IZ = 5 mA VR = 5.5 V IZ = 0.5 mA IZ = 5 mA VR = 0 V, f = 1 MHz Min Typ 0.9 1.1+0.3 -0.1 4: Anode 1, 2, 3, 4 5: Cathode 4 EIAJ: SC-74A Mini5-G1 Package 1 Max 1.0 6.5 3 100 30 Unit V V A pF 5.9 8 Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1: The temperature must be controlled 25C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25C). 2: VZ guaranteed 20 ms after current flow. * 0.40.2 Features 5 Publication date: November 2003 SKE00017BED 1 MAYK062D Ptot Ta 250 Heat sink Copper foil 0.8 mm x 10 mm 200 I Z VZ 102 Ta = 150C 10 Ta = 100C 102 I F VF Ta = 150C Total power dissipation Ptot (mW) Forward current IF (mA) Zener current IZ (mA) 10 Ta = 100C Ta = 25C Ta = -20C 150 1 Ta = 25C Ta = -20C 1 100 10-1 10-1 50 10-2 0 0 50 100 150 200 250 10-3 10-2 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1.0 1.2 Ambient temperature Ta (C) Zener voltage VZ (V) Forward voltage VF (V) IR V R 1 102 RZ IZ Ta = 25C SZ IZ Temperature coefficient of zener voltage SZ (mV / C) 20 10-1 Zener operating resistance RZ () 15 Reverse current IR (nA) Ta = 150C 10-2 Ta = 100C 10-3 Ta = 25C 10 10 5 1 10-4 0 10-5 0 2 4 6 10-1 10-2 10-1 1 10 102 -5 0 10 20 30 40 50 Reverse voltage VR (V) Zener current IZ (mA) Zener current IZ (mA) Ct VR 10 Terminal capacitance Ct (pF) 8 6 4 2 0 0 2 4 6 Reverse voltage VR (V) 2 SKE00017BED Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP |
Price & Availability of MAYK062D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |